Part handled by suction cups
Min 6” x 6” 1 and 2
Max 98.4” x 39.37”
Sheet thickness
0.024” – 10 ga
Maximum part weight
110 lbs
Sheet size
min(Sheet handled by unloading clamps) 63” x 11.8” 2
max (Skeleton or sheet with microjoined parts) 120” x 60” 2
Stacking space
Stacking table 133.8” x 55”
Scrap pallet (incl. skid) 17.7”
Max. load(fully spread)
Stacking table 4.4 Tons
Scrap pallet 2.2 Tons
Max. speed
X axis 7,086 IPM
Y axis 3,149 IPM
Z axis 1,417 IPM
Suction cups
Ø 40 mm 8 pcs
Ø 50 mm 8 pcs
NCT interrupt time / part
3 – 7 sec
Electrical supply
480 VAC 3 Phase 60Hz 8.5 kW
Fuse size
3 x 25 A
Motor output
X axis 8.0 Nm
Y axis 2.7 Nm
Z axis 2.7 Nm
Stacking table 1.5 kW
Lifting table for scrap pallet 1.5 kW
Pallet carrier 0.25 kW
SPT-table 0.25 kW
Air supply
90 PSI; 35 CFM
Noise level
<85 dB(A)
1. The part has to have an area for the suction cups. Holes and bendings reduce the area.
2. The maximum warping on machined sheets is 10 mm.