Travel Method
Stationary table, X, Y and Z-axis movement for cutting head
Control Method
X-, Y-, and Z- axis controlled (Three axis simultaneously controlled)
Travel amount
X = 49.6"
Y = 49.6"
Z = 3.9" with 5” lens (1.5” with 7.5” lens)
Rapid rate
X = 1,181" / min
Y = 1,181" / min
Z = 590" / min
Maximum worksheet loading capacity
176 lbs.
Repeatable Positioning accuracy
±0.0004" / 20”
Least command increment
0.0001
Drive feed method
Ball screw
Assist gas type selector
Automatic selection
Machine table height
33.5"
Total machine weight (including cooling unit and dust collector)
8,488 lbs.
Power supply (only for machine)
AC, 3-phases, 200-220V
Laser Power
2000 watts
Travel method
A-axis (rotational axis)
Control method
X, Y, Z, and A axes are simultaneously controlled)
Maximum rotation speed
20 rotations per minute
Maximum loading capacity
77 pounds (35 kg)
Repeatable angle accuracy
± 0.03 degrees
Least command increment
0.01 degree
Drive feed method
AC servo motor (0.5kW)
Maximum outside tube diameter
7.086” (180 mm)
Maximum tube length with centering cone in use
43.307” (1,100 mm)
Minimum tube length
3.937” (100 mm)
Dead zone for the chuck
3.937” (100 mm)
Maximum outside tube diameter that can go through the chuck
2.165” (100 mm)
Chuck type
Four (4) finger, manual scroll chuck
Centering pipe support
Sliding support with metal cone attachment
Sliding pipe support rollers (2 sets)
One roller support arms for 0.0787” to 3.937” OD and the other roller support arms for 3.937” to 7.086” OD
Maximum work table size
36” (Y-axis) x 49” (X-axis) with sub-table removed 49” (Y-axis) x 49” (X-axis) with sub-table removed
CNC unit
FS160i-LA (FANUC)
CNC control method
Semi-closed loop method
Control functions
X, Y, Z, and A-axes controlled (simultaneously controlled)
Laser oscillator control
Input methods
3.5" FD (built-in type)
Manual data input with numeric keys
Least input increment
0.0001"
Minimum position detection accuracy
0.0001"
Program storage capacity
126kB
Operating modes
Edit / Memory / MDI / Retract / Manual
Display functions
Program directory
Cutting conditions
Position information
Parameters
Messages
Tool diameter compensation (Offset)
Program check
Diagnosis (CNC self-diagnostics)
Settings
I/O interface
RS232C
Display
9.5" monochrome display