Technical Notes

 
Parameter loading procedures for Laser

AESI Service Department Customer Support -- Tech Note: L001
Applies to: All Amada Lasers.
Last updated: December 27, 1996.
 

Catalog

Please choose from the following list which control you have. By choosing a control, you will be taken to that page for other options.

Fanuc 6M Control

Fanuc 11M Control

Fanuc 0M Control

Fanuc 0L Control

Fanuc 04PLA Control

Fanuc 16LA Control

Fanuc 16LB Control
 

Special Notes

  1. Locate the parameter tapes inside the control. They are usually located in a bag inside the control cabinet. There are also altered parameter data sheets located behind one of the doors on the control. If you do not have parameter tapes or disks, you can download the parameters at our Parameter site.
  2. There are several parameters that may have been altered over time and should be recorded if you can access your parameter pages. Some parameters are unique to each machine, such as axis grid shifts, and will require adjustment after reloading parameter data.
  

Copyright© 2025 AMADA CANADA, INC. All Rights Reserved.